sheet molding compound for Automobile

SMC Application Areas

img of SMC Composite Material for Automobile

img 1 of SMC Composite Material for Automobile

img 2 of SMC Composite Material for Automobile

img 3 of SMC Composite Material for Automobile

img 4 of SMC Composite Material for Automobile

img 5 of SMC Composite Material for Automobile

img 6 of SMC Composite Material for Automobile

thumb img of SMC Composite Material for Automobile

thumb img 6 of SMC Composite Material for Automobile

SMC Composite Material for Automobile

• Good surface gloss

• Extremely low shrinkage

• Good water resistance

• High strength

• Low specific gravity

Request your customized solution

Field of application:

Car trunk cover, engine cover, fuel tank anti-rock cover, etc.; truck bumper, tool box cover, deflector, fender, battery box cover, etc.; engineering machinery engine cover, control room, bumper, hoarding etc.

Technical information (Formula can be designed according to requirements)

Test items	Test Standards	Units	Measured properties of pressed products
Test items	Test Standards	Units	NSK SMC-2308	NSK SMC-2406	NSK SMC-5504	NSK SMC-5506	NSK SMC-5502
Shrinkage	ISO 2577	％	≤ 0.12	﹤0	≤ 0.01	≤ 0.10	≤ 0.15
Density	ISO 1183	g/cm³	1.70~1.90	1.47~1.53	1.70~1.90	1.70~1.90	1.70-1.90
Tensile Strength	ISO R 527	MPa	≥ 50	≥ 65	≥ 65	≥ 80	≥ 100
Bending strength	ISO 178	MPa	≥ 140	≥ 140	≥ 150	≥ 180	≥ 240
Flexural modulus	ISO 178	GPa	≥ 8	≥ 8	≥ 8	≥ 8	≥ 8
Izod Impact Strength	ASTMD 256	kJ/㎡	≥ 45	≥ 50	≥ 55	≥ 65	≥ 65
Application			Universal	lightweight	Very low shrinkage High surface requirements	high strength	Special Purpose